Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 609 / 1202

inst_h3.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
4-131
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.4.3 Mounting the System Cabinet in the 19-Inch Cabinet
Introduction
You can install up to three system cabinets in a 19-inch cabinet. Each cabinet must be mounted
separately.
It is only possible to extend the HiPath 3700 to a three cabinet system if the 19-inch cabinets
are next to one another and accessible from the back.
Cabinets are supplied fitted with the specific boards required by the customer.
4.3.4.3.1 Removing the Cabinet Covers
How the covers are secured
The front cabinet cover (for board servicing) and the rear cabinet cover (for cable servicing) are
each secured by two snap fasteners.
You can remove the upper and lower grills on both covers. This allows the cables to be routed
to the patch panel for example.
To replace a cover, position the snap fasteners in the two guides and press down on the cover
until it snaps into place.
7
WARNING
A fully equipped HiPath 3700 cabinet weighs 22 kg (48.46 lb). We recommend lifting
cabinets only before they are equipped. Do not attempt to lift objects that you think
are too heavy for you; use a hand truck or get assistance.
7
Danger
Be sure to ground the system properly before starting it up and connecting the sta-
tions.