Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 108 / 1202

Boards for HiPath 3000
P31003-H3560-S403-54-7620, 09/05
3-18
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
boards.fm
Central Boards
3.2 Central Boards
3.2.1 CBCC
Introduction
The CBCC board ( C entral B oard with C oldfire C om, S30810-Q2935-A301) performs all central
control and switching functions for HiPath 3550 and HiPath 3350 (see Figure 3-1).
Subboards
The following subboards can be used depending on the application:
●
Clock module CMA or CMS (optional)
●
MMC multimedia card
●
IMODN integrated modem card new (optional)
●
LIM LAN interface module (optional)
●
MPPI music on hold (optional)
●
EVM entry voice mail (optional)
Outputs, interfaces
●
Eight digital U
P0/E
subscriber lines
For example, U
P0/E
workpoint clients or BS3/1 base stations for HiPath Cordless Office can
be connected here.
●
Four analog T/R subscriber lines
For U.S. only: These interfaces do not support the connection of external extensions via
OPS (Off-Premises Station) signaling.
For Australia only: The T/R interfaces supply a ring voltage of 35 V
eff
. Depending on the
terminals connected, we cannot exclude the possibility of errors occurring during ringing
state.
7
Caution
The system must be powered down and de-energized before removing or inserting
all boards in the HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300 and before
removing or inserting the central boards of the HiPath 3800, HiPath 3750 and Hi-
Path 3700.
>
The CBCC central control board needs to be replaced for HiPath 3000 V6.0. The
CBCC S30810-Q2935-A301 board is required.
The “old” CBCC board S30810-Q2935-A201 is not supported.