Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 856 / 1202

Workpoint Clients
P31003-H3560-S403-54-7620, 09/05
10-4
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
wclient.fm
optiPoint 500
10.2 optiPoint 500
Introduction
optiPoint 500 telephones handle the digital communication of voice and data (voice communi-
cation only for optiPoint 500 entry and optiPoint 500 economy). The three dialog keys and the
display guarantee convenient and interactive operation. Furthermore, the key lamp principle vi-
sualizes the activated functions.
With the exception of optiPoint 500 entry and optiPoint 500 economy, the optiPoint 500 tele-
phones have a USB 1.1 interface. This allows for PC-supported telephoning and Internet ac-
cess over the USB interface of a PC.
The optiPoint key module and optiPoint BLF add-on devices increase the number of function
keys available.
The different optiPoint 500 adapters allow flexible expansion of the telephone workstation. Ad-
ditional devices (such as personal computers, fax equipment, telephones, headsets) can be
connected quickly because it is easy to build them on to the bottom of the telephones (not
optiPoint 500 entry and optiPoint 500 economy) and because the adapters are plug "n" play".
You can find information not contained in this chapter in the optiPoint 500 Service Manual.
>
The optiPoint 500 telephones described in this section are compatible with the op-
tiset E telephones. It is possible to operate both telephone families on one U
P0/E
board. You can also use telephones from the two families in mixed host-client con-
figurations (earlier called the master-slave or primary-secondary configuration).
You can find information on optiset E telephones, adapters, and add-on devices in
the Hicom 150 H V1.0/Hicom 150 E Office Rel.2.0-3.0 Service Manual (refer to
Section 1.6, “Information on the Intranet”): Electronic Documentation on Com ESY
Products).