Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Руководство по обслуживанию, Страница: 807 / 1202

licensing.fm
P31003-H3560-S403-54-7620, 09/05
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
8-29
Licensing
Licensing optiClient Attendant
5. Once the license data has been transferred to the CLA, the optiClient Attendant can
start.
Licensing is controlled by the CLA. For this reason, communication between the op-
tiClient Attendant and CLA must be ensured during active operation. If the connection
to the CLA is lost or the CLA breaks down, an error message is output at the optiCli-
ent Attendant. At this point, the optiClient Attendant is still operational.
If the optiClient Attendant cannot locate a CLA at startup, the optiClient Attendant will
not boot.
“Any” number of optiClient Attendants can be installed. However, the CLA monitors
the number of licensed optiClient Attendants as part of the logon procedure and dur-
ing operation.
Depending on the model, up to six optiClient Attendants can be started per system.
When the optiClient Attendant is started for the first time, a 30-day grace period be-
gins. During this time, a optiClient Attendant can be operated without a license. All
optiClient Attendants (including those that have been subsequently installed) must be
licensed before the grace period expires for the first optiClient Attendant installed.
The 30-day limit cannot be extended and a second grace period will not be granted.
In this case, the CLS generates a license key for the CLA PC, and not for HiPath
3000.
Step Activity (Remarks)