Q2 Q2A, Техническое руководство

Страница: 839 / 866

Parameter
Details
12
12.10 o: KEYPAD
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual 839
When you replace a drive, set o4-07 = 0 to reset the value of U4-06 . When the o4-07 setting changes the count of
U4-06 starts again as specified by the setting of o4-07 . After you complete the configuration, the setting value of
o4-07 automatically resets to 0 .
Note:
The maintenance period changes for different operating environments.
■
o4-09 IGBT Preset Maintenance Cnt
No.
(Hex.)
Name Description
Default
(Range)
o4-09
(0525)
IGBT Preset Maintenance
Cnt
Sets the U4-07 [IGBT Maintenance] monitor value.
0%
(0 - 150%)
When you replace a drive, set o4-09 = 0 to reset the value of U4-07 . When the o4-09 setting changes the count of
U4-07 starts again as specified by the setting of o4-09 . After you complete the configuration, the setting value of
o4-09
automatically resets to
0
.
Note:
The maintenance period changes for different operating environments.
■
o4-11 Flt.History Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-11
(0510)
Flt.History Initialization
Resets the records of Monitors [U2: FAULT] and [U3: FAULT HISTORY] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Init Parameters] , the drive will not reset the records for U2-xx and U3-xx .
0 : No Reset
Keeps the records of Monitors U2-xx and U3-xx .
1 : Reset
Resets the records for Monitors U2-xx and U3-xx . After the reset, the drive automatically resets o4-11 to 0 .
■
o4-12 kWh Monitor Initialization
No.
(Hex.)
Name Description
Default
(Range)
o4-12
(0512)
kWh Monitor Initialization
Resets the monitor values for U4-10 [kWh Lower 4Digits] and U4-11 [kWh Upper 5Digits] .
0
(0, 1)
Note:
When you initialize the drive with A1-03 [Initialize Parameters] , the drive will not reset U4-10 and U4-11 .
0 : No Reset
Keeps the monitor values for U4-10 and U4-11 .
1 : Reset
Resets the values of U4-10 and U4-11 . After the reset, the drive automatically resets o4-12 to 0 .
■
o4-13 NumOfRunCom Init Counter
No.
(Hex.)
Name Description
Default
(Range)
o4-13
(0528)
NumOfRunCom Init
Counter
Resets the monitor values for U4-02 [Num of Run Commands] , U4-24 [No of Travels(L)] , and
U4-25 [No of Travels(H)] .
0
(0, 1)
0 : No Reset
Keeps the monitor values for U4-02 , U4-24, and U4-25 .
1 : No Reset
Resets the values of U4-02 , U4-24 , and U4-25 . After the reset, the drive automatically resets o4-13 to 0 .
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV