Q2 Q2A, Техническое руководство

Страница: 829 / 866

Parameter
Details
12
12.10 o: KEYPAD
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual 829
■
o1-11 FrqDisplay Decimal Places
No.
(Hex.)
Name Description
Default
(Range)
o1-11
(0521)
FrqDisplay Decimal Places
Sets the number of decimal places for frequency reference and monitor values.
Determined by o1-03
(0 - 3)
0 : (XXXXX) No Decimal Places
1 : (XXXX.X) 1 Decimal Place
2 : (XXX.XX) 2 Decimal Places
3 : (XX.XXX) 3 Decimal Places
Note:
Set o1-03 = 3 [FrqDisplay Unit Selection = User-selected units] before you set o1-10 [FrqDisplay Max Value] and o1-11 .
■
o1-24 to o1-35 Cust.Monitor 1 to 12
No.
(Hex.)
Name Description
Default
(Range)
o1-24 to o1-35
(11AD - 11B8)
RUN
Cust.Monitor 1 to 12
Sets a maximum of 12 monitors as user monitors. This parameter is only available with an LED
keypad.
o1-24: 101
o1-25: 102
o1-26: 103
o1-27 to o1-35: 0
(0, 101 - 999)
These parameters save the monitor items selected by the LCD keypad [Custom Monitor].
Note:
•
You can show a maximum of three selected monitors on one LCD keypad screen.
– When you select only one monitor, the text size of this monitor increases. For example, when o1-25 to o1-35 = 0 , the text size of the
monitor saved in o1-24 increases.
–
When you select two monitors, the text size of these monitors increase.
–
When you select four or more monitors, the fourth monitor and all additional monitors are shown on the next screens.
• You can show the monitors that you select with o1-24 to o1-26 as a bar graph, analog gauge, or trend plot.
– Bar graph display: 3 monitors maximum
Select with o1-24 , o1-25 , and o1-26 .
– Analog gauge display: 1 monitor
Select with o1-24 .
–
Trend plot display: 2 monitors
Select with o1-24 and o1-25 .
•
You can only set parameters o1-24 to o1-26 with analog output monitors.
• You can set parameters o1-27 to o1-35 with all monitors.
■
o1-36 LCD Backlight Brightness
No.
(Hex.)
Name Description
Default
(Range)
o1-36
(11B9)
RUN
LCD Backlight Brightness
Sets the intensity of the LCD keypad backlight.
3
(1 - 5)
When you decrease the setting value, the intensity of the backlight decreases. When you increase the setting
value, the intensity of the backlight increases.
■
o1-37 LCD Blight ON/OFF Selection
No.
(Hex.)
Name Description
Default
(Range)
o1-37
(11BA)
RUN
LCD Blight ON/OFF
Selection
Sets the automatic shut off function for the LCD backlight.
1
(0, 1)
Note:
Use o1-36 [LCD backlight adjustment] to adjust the intensity of the LCD backlight.
0 : OFF
1 : ON
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV