Omron RX - 2, Руководство пользователя

Страница: 880 / 920

Appendices C Table of Parameters
C - 32 High-function General-purpose Inverter RX2 Series User’s Manual
AH-89 ○ Setpoint boost time 0.00 to 100.00 (s) 0.00
AH-90 ○ Setpoint boost value 0.00 to 100.00 (%) 0.00
AH-91 ○
Minimum RUN time befor PID
sleep
0.00 to 100.00 (s) 0.00
AH-92 ○ Minimum active time of PID sleep 0.00 to 100.00 (s) 0.00
AH-93 - PID sleep trigger selection
01 (Deviation amount)/02 (Low feedback)/
03 ([WAKE] terminal)
01
AH-94 ○ PID wake start level 0.00 to 100.00 (%) 0.00
AH-95 ○ PID wake start time 0.00 to 100.00 (s) 0.00
AH-96 ○ PID wake start deviation value 0.00 to 100.00 (%) 0.00
*1. Data range differs depending on [AH-04] to [AH-06].
Code
Codes that
can be
changed
during
operation
Name Data range
Initial
value
Note
AJ-01 - PID2 enable
00 (Disabled)/
01 (Enabled Without reverse output)/
02 (Enabled With reverse output)
00
AJ-02 - PID2 deviation inverse 00 (Disabled)/01 (Enabled) 00
AJ-03 - PID2 unit selection
See <Unit options> on page C-70 at the end of Appendices
C
01
AJ-04 ○ PID2 scale adjustment (0%) -10000 to 10000 0
AJ-05 ○ PID2 scale adjustment (100%) -10000 to 10000 10000
AJ-06 ○
PID2 scale adjustment (point
position)
0 to 4 2
AJ-07 -
Input source selection of
Set-point for PID2
00 (None)/01 (Ai1 terminal input)/02 (Ai2 terminal input)/
03 (Ai3 terminal input)/04 (Reserved)/05 (Reserved)/
06 (Reserved)/07 (Parameter setting)/08 (RS 485)/
09 (Option 1)/10 (Option 2)/11 (Option 3)/
12 (Pulse string input: main unit)/
13 (Pulse string input: Option)/15 (PID1 output)
07
AJ-10 ○ Set-point setting for PID2
-100.00 to 100.00 (%)
*1
0.00
AJ-12 -
Input source selection of Pro-
cess data for PID2
00 (None)/01 (Ai1 terminal input)/02 (Ai2 terminal input)/
03 (Ai3 terminal input)/04 (Reserved)/05 (Reserved)/
06 (Reserved)/07 (Parameter setting)/08 (RS 485)/
09 (Option 1)/10 (Option 2)/11 (Option 3)/
12 (Pulse string input: main unit)/
13 (Pulse string input: Option)
02
AJ-13 ○ PID2 proportional gain 0.0 to 100.0 1.0
AJ-14 ○ PID2 integral time constant 0.0 to 3600.0 (s) 1.0
AJ-15 ○ PID2 derivative gain 0.00 to 100.00 (s) 0.00
AJ-16 ○ PID2 output range 0.00 to 100.00 (%) 0.00
AJ-17 ○ PID2 deviation over level 0.00 to 100.00 (%) 3.00
AJ-18 ○
PID2 feedback compare signal
turn-OFF level
0.00 to 100.00 (%) 100.00
AJ-19 ○
PID2 feedback compare signal
turn-ON level
0.00 to 100.00 (%) 0.00
AJ-21 - PID3 enable
00 (Disabled)/
01 (Enabled Without reverse output)/
02 (Enabled With reverse output)
00
AJ-22 - PID3 deviation inverse 00 (Disabled)/01 (Enabled) 00
AJ-23 - PID3 unit selection
See <Unit options> on page C-70 at the end of Appendices
C
01
AJ-24 ○ PID3 scale adjustment (0%) -10000 to 10000 0
AJ-25 ○ PID3 scale adjustment (100%) -10000 to 10000 10000
AJ-26 ○
PID3 scale adjustment (point
position)
0 to 4 2
Code
Codes that
can be
changed
during
operation
Name Data range
Initial
value
Note