Omron RX - 2, Руководство пользователя

Страница: 581 / 920

8 - 181
8 Applied Settings
High-function General-purpose Inverter RX2 Series User’s Manual
8-1
1 Ou
tpu
t T
ermin
al Fu
n
ction
8
8-1
1-5
Analog Output
Ter
mina
l Switch Setting
s
With Analog output terminals Ao1 and Ao2, you can select voltage output or current output by operating
Switches SW3 and SW4 on the substrate.
Precautions for Correct Use
• In the switch setting on the substrate during factory setting, [A01] is output voltage; [A02] is
output current.
• Operate the switches on the substrate while the inverter power supply is turned off.
• When [Cd-10]=01 is set, [FM], [Ao1], and [Ao2] respectively perform outputs in accordance
with values of [Cd-15], [Cd-25], and [Cd-35].
 Parameter
8-11-5 Analog Output Terminal Switch Settings
Item Parameter Data Description
Default
data
[Ao1] monitor output
selection
[Cd-04]
Parameter
number for
8-11-4 Analog
Output Termi-
nal Adjustment
on page 8-178.
Sets a parameter number.
[dA-01]
[Ao2] monitor output
selection
[Cd-05] [dA-01]
Analog monitor adjust
mode enable
[Cd-10]
00 Invalid.
00
01
Valid. Outputs to terminals output levels in
the adjustment mode.
Filter time constant of
[Ao1] monitor
[Cd-21] 1 to 500[ms] Filters and outputs the selected data. 100
[Ao1] Data type
selection
[Cd-22]
00 Outputs the absolute value of data.
00
01 Outputs data with a symbol as is.
[Ao1] monitor bias
adjustment
[Cd-23]
-100.0 to
100.0[%]
Biases data to adjust Point 0 of data. 0.0
[Ao1] monitor gain
adjustment
[Cd-24]
-1000.0 to
1000.0[%]
Apply a gain to data to adjust an inclination
in data.
100.0
Output level setting at
[Ao1] monitor adjust
mode
[Cd-25]
-100.0 to
100.0[%]
Sets output in the adjustment mode. It
selects the maximum output (at 100.0%),
the minimum output (at 0.0%) ([Cd-22]=00),
or the minimum output (at -100.0%)
([Cd-22]=01).
100.0
Filter time constant of
[Ao2] monitor
[Cd-31] 1 to 500[ms] Filters and outputs the selected data. 100
[Ao2] Data type
selection
[Cd-32]
00 Outputs the absolute value of data.
0
01 Outputs data with a symbol as is.
[Ao2] monitor bias
adjustment
[Cd-33]
-100.0 to
100.0[%]
Biases data to adjust Point 0 of data. 20.0
[Ao2] monitor gain
adjustment
[Cd-34]
-1000.0 to
1000.0[%]
Apply a gain to data to adjust an inclination
in data.
80.0
Output level setting at
[Ao2] monitor adjust
mode
[Cd-35]
-100.0 to
100.0[%]
Sets output in the adjustment mode. It
selects the maximum output (at 100.0%),
the minimum output (at 0.0%) ([Cd-32]=00),
or the minimum output (at -100.0%)
([Cd-32]=01).
100.0