Mitsubishi Electric MR-J4W2-0303B6, Инструкция по эксплуатации

Страница: 119 / 588

5. PARAMETERS
5 - 22
No. Symbol Name and function
Initial
value
[unit]
Setting
range
Each/
Common
PA24 AOP4 Function selection A-4 Refer to Name
and function
column. Each
Setting
digit
Explanation
Initial
value
_ _ _ x Vibration suppression mode selection
0: Standard mode
1: 3 inertia mode
2: Low response mode
When two low resonance frequencies are generated, select
"3 inertia mode (_ _ _ 1)". When the load to motor inertia
ratio exceeds the recommended load to motor inertia ratio
select "Low response mode (_ _ _ 2)".
When you select the standard mode or low response mode,
"Vibration suppression control 2" is not available.
When you select the 3 inertia mode, the feed forward gain
is not available.
Before changing the control mode with the controller during
the 3 inertia mode or low response mode, stop the motor. 0h
_ _ x _ For manufacturer setting 0h
_ x _ _ 0h
x _ _ _ 0h
PA25 OTHOV One-touch tuning - Overshoot permissible level
Set a permissible value of overshoot amount for one-touch tuning as a percentage of
the in-position range.
However, setting "0" will be 50%.
0
[%]
0
to
100
Each