manualshive.com logo in svg

Mitsubishi Electric MR-J4W2-0303B6, Инструкция по эксплуатации

Этот продукт, Mitsubishi Electric MR-J4W2-0303B6, обеспечивает высокую производительность в области промышленной автоматизации. Для получения подробной информации и руководства по эксплуатации, вы можете бесплатно загрузить инструкцию с нашего сайта. manualshive.com. Легко и удобно!

Поделиться
Скачать
background image

1. FUNCTIONS AND CONFIGURATION 

1 -  1 

 

1. FUNCTIONS AND CONFIGURATION 

POINT 

 

In MELSERVO-J4 series, ultra-small capacity servo amplifiers compatible with 
48 V DC and 24 V DC power supplies are available as MR-J4W2-0303B6. Refer 
to chapter 18 for details of MR-J4W2-0303B6 servo amplifiers. 

 
1.1 Summary 

The MELSERVO-J4 series of multi-axis servo amplifiers inherits the high performance, sophisticated 
functions, and usability of the MR-J4-B servo amplifiers, and ensures space saving, reduced wiring, and 
energy saving. 
The MR-J4W_-B servo amplifier is connected to controllers, including a servo system controller, on the high-
speed synchronous network, SSCNET III/H. The servo amplifier directly receives a command from a 
controller to drive a servo motor. 
One MR-J4W_-B servo amplifier can drive two or three servo motors. The footprint of one MR-J4W_-B servo 
amplifier is considerably smaller than that of two or three MR-J4-B servo amplifiers. You can install MR-
J4W_-B servo amplifiers without clearance between them. This makes your system more compact. 
The multi-axis structure enables multiple axes to share the SSCNET III cable, control circuit power supply 
cable, and main circuit power supply cable. This ensures reduced wiring. 
For the MR-J4W_-B servo amplifier, the parameter settings allows you to use a rotary servo motor, linear 
servo motor, and direct drive motor for each axis. The axes can be connected to a rotary servo motor, linear 
servo motor, and direct drive motor, which have different capacity. Using a linear servo motor or direct drive 
motor simplifies the system, and using the MR-J4W_-B servo amplifier downsizes the equipment, enhances 
the equipment performance, and ensures space saving. 
Using regenerative energy generated when a servo motor decelerates ensures energy saving. 
Depending on the operating conditions, the regenerative option is not required. 
As the MR-J4-B servo amplifier, the MR-J4W_-B servo amplifier supports the one-touch tuning and the real-
time auto tuning. This enables you to easily adjust the servo gain according to the machine.  
The tough drive function and the drive recorder function, which are well-received in the MELSERVO-JN 
series, have been improved. The MR-J4W_-B servo amplifier supports the improved functions.  Additionally, 
the preventive maintenance support function detects an error in the machine parts. This function provides 
strong support for the machine maintenance and inspection. 
On the SSCNET III/H network, the stations are connected with a maximum distance of 100 m between them. 
This allows you to create a large system. 
The MR-J4W_-B servo amplifier supports the STO (Safe Torque Off) function. When the servo amplifier is 
connected to a SSCNET III/H-compatible servo system controller, in addition to the STO function, the servo 
amplifier also supports the SS1 (Safe Stop 1), SS2 (Safe Stop 2), SOS (Safe Operating Stop), SLS (Safely-
Limited Speed), SBC (Safe Brake Control) and SSM (Safe Speed Monitor) functions. 
The servo amplifier has a USB communication interface. Therefore, you can connect the servo amplifier to 
the personal computer with MR Configurator2 installed to perform the parameter setting, test operation, gain 
adjustment, and others. 
 

Содержание MR-J4W2-0303B6













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MR-J4W2-0303B6

JBL SR Series Installation And Operating Instructions Manual preview
SR Series
Бренд: JBL Страницы: 8
Party Light & Sound PARTY-KA100 Instruction Manual preview
PARTY-KA100
Бренд: Party Light & Sound Страницы: 19
Rolls HA43 Owner'S Manual preview
HA43
Бренд: Rolls Страницы: 2
Akai AA-8500 Service Manual preview
AA-8500
Бренд: Akai Страницы: 21
MultiChannel Wireless2100-System Manual preview
Wireless2100-System
Бренд: MultiChannel Страницы: 43
Neets 312-0001 Manual preview
312-0001
Бренд: Neets Страницы: 20
Topp Music Gear KPA 300R User Manual preview
KPA 300R
Бренд: Topp Music Gear Страницы: 10
Harman JBL Stage A6004 Manual preview
JBL Stage A6004
Бренд: Harman Страницы: 4
NXP Semiconductors BGA2711 Datasheet preview
BGA2711
Бренд: NXP Semiconductors Страницы: 11
Whelen Engineering Company 295HFANC Installation Manual preview
295HFANC
Бренд: Whelen Engineering Company Страницы: 5
icon Audio Stereo 20 SE Instruction Manual preview
Stereo 20 SE
Бренд: icon Audio Страницы: 8
ZeeVee ZyPerHD User Manual preview
ZyPerHD
Бренд: ZeeVee Страницы: 33
Pyle PDA4BU User Manual preview
PDA4BU
Бренд: Pyle Страницы: 10
Sencor SCA AMP2250 User Manual preview
SCA AMP2250
Бренд: Sencor Страницы: 9
Link electronics PRC-970 Specifications preview
PRC-970
Бренд: Link electronics Страницы: 2
Fender Acoustasonic 30 Operating Instructions Manual preview
Acoustasonic 30
Бренд: Fender Страницы: 16
Ocean Matrix OMX-MDA10S Instruction Manual preview
OMX-MDA10S
Бренд: Ocean Matrix Страницы: 4
McIntosh Mac 1700 Owner'S Manual preview
Mac 1700
Бренд: McIntosh Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды