manualshive.com logo in svg

Mitsubishi Electric MR-J4W2-0303B6, Инструкция по эксплуатации

Этот продукт, Mitsubishi Electric MR-J4W2-0303B6, обеспечивает высокую производительность в области промышленной автоматизации. Для получения подробной информации и руководства по эксплуатации, вы можете бесплатно загрузить инструкцию с нашего сайта. manualshive.com. Легко и удобно!

Поделиться
Скачать
background image

1. FUNCTIONS AND CONFIGURATION 

1 -  11 

 

Function Description 

Detailed 

explanation 

SEMI-F47 function (Note) 

Enables to avoid triggering [AL. 10 Undervoltage] using the electrical energy 
charged in the capacitor in case that an instantaneous power failure occurs during 
operation. Use a 3-phase for the input power supply of the servo amplifier. Using a 
1-phase 200 V AC for the input power supply will not comply with the SEMI-F47 
standard. 

[Pr. PA20] 
[Pr. PE25] 
Section 7.4 

Tough drive function  

This function makes the equipment continue operating even under the condition 
that an alarm occurs. 
The tough drive function includes two types: the vibration tough drive and the 
instantaneous power failure tough drive. 

Section 7.3 

Drive recorder function 

This function continuously monitors the servo status and records the status 
transition before and after an alarm for a fixed period of time. You can check the 
recorded data on the drive recorder window on MR Configurator2 by clicking the 
"Graph" button. 
However, the drive recorder will not operate on the following conditions. 
1.  You are using the graph function of MR Configurator2. 
2.  You are using the machine analyzer function.  
3.  [Pr. PF21] is set to "-1". 
4.  The controller is not connected (except the test operation mode). 
5.  An alarm related to the controller is occurring. 

[Pr. PA23] 

STO function 

This function is a functional safety that complies with IEC/EN 61800-5-2. You can 
create a safety system for the equipment easily.  

Chapter 13 

Servo amplifier life diagnosis 
function 

You can check the cumulative energization time and the number of on/off times of 
the inrush relay. Before the parts of the servo amplifier, including a capacitor and 
relay, malfunction, this function is useful for finding out the time for their 
replacement. 
MR Configurator2 is necessary for this function. 

 

Power monitoring function 

This function calculates the power running and the regenerative power from the 
data, including the speed and current, in the servo amplifier. MR Configurator2 can 
display the data, including the power consumption. Since the servo amplifier sends 
data to a servo system controller, you can analyze the data and display the data on 
a display with the SSCNET III/H system. 

 

Machine diagnostic function 

From the data in the servo amplifier, this function estimates the friction and 
vibrational component of the drive system in the equipment and recognizes an 
error in the machine parts, including a ball screw and bearing. 
MR Configurator2 is necessary for this function. 

 

Fully closed loop system 

Fully closed system can be configured using the load-side encoder. (not available 
with the MR-J4 3-axis servo amplifiers) 
This is used with servo amplifiers with software version A3 or later. Check the 
software version with MR Configurator2. 

Chapter 16 

Scale measurement function 

The function transmits position information of a scale measurement encoder to the 
controller by connecting the scale measurement encoder in semi closed loop 
control. 
Used by servo amplifiers with software version A8 or later. (not available with the 
MR-J4 3-axis servo amplifiers) 

Section 17.2 

J3 compatibility mode 

This amplifier has "J3 compatibility mode" which compatible with the previous MR-
J3-B series. Refer to section 17.1 for software versions. 

Section 17.1 

Continuous operation to 
torque control mode 

This enables to smoothly switch the mode from position control mode/speed 
control mode to torque control mode without stopping. This also enables to 
decrease load to the machine and high quality molding without rapid changes in 
speed or torque. For details of the continuous operation to torque control mode, 
refer to the manuals for servo system controllers. 

[Pr. PB03] 
 
Servo system 
controller 
manuals 

 

Note. For servo system controllers which are available with this, contact your local sales office. 

 

Содержание MR-J4W2-0303B6













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MR-J4W2-0303B6

JBL CS Series Owner'S Manual preview
CS Series
Бренд: JBL Страницы: 4
NAD 90 Service Manual preview
90
Бренд: NAD Страницы: 7
GAI-Tronics SP2 Instruction Manual preview
SP2
Бренд: GAI-Tronics Страницы: 24
Panasonic MINAS-BL GP series Instructions Manual preview
MINAS-BL GP series
Бренд: Panasonic Страницы: 56
e-motion SCA-LE-30-03 Manual preview
SCA-LE-30-03
Бренд: e-motion Страницы: 13
Baldwin Boxall A120 Operating Instructions preview
A120
Бренд: Baldwin Boxall Страницы: 4
Harman Kardon HK 675 Owner'S Manual preview
HK 675
Бренд: Harman Kardon Страницы: 8
Genz Benz Shen 100 Owner'S Manual preview
Shen 100
Бренд: Genz Benz Страницы: 6
Inter-m PA-120A Operation Manual preview
PA-120A
Бренд: Inter-m Страницы: 20
McIntosh MC7100 Owner'S Manual preview
MC7100
Бренд: McIntosh Страницы: 20
Jedia JPA-1060 Operating Instruction preview
JPA-1060
Бренд: Jedia Страницы: 16
Camco Vortex 2.6 Owner'S Manual preview
Vortex 2.6
Бренд: Camco Страницы: 32
D.W. Fearn VT-12 Operating Instructions Manual preview
VT-12
Бренд: D.W. Fearn Страницы: 37
Marantz PM7001KI Service Manual preview
PM7001KI
Бренд: Marantz Страницы: 46
Marantz HD-AMP1/U1B/K1B/FN Service Manual preview
HD-AMP1/U1B/K1B/FN
Бренд: Marantz Страницы: 99
Blackstar HT-5RS Quick Start Manual preview
HT-5RS
Бренд: Blackstar Страницы: 1
AMC iComC 2x20 User Manual preview
iComC 2x20
Бренд: AMC Страницы: 9
Ltc Audio PAA80BT Instruction Manual preview
PAA80BT
Бренд: Ltc Audio Страницы: 57

Бренды по названию

Популярные бренды

Загрузить еще бренды