manualshive.com logo in svg

Mitsubishi Electric MR-J4W2-0303B6, Инструкция по эксплуатации

Этот продукт, Mitsubishi Electric MR-J4W2-0303B6, обеспечивает высокую производительность в области промышленной автоматизации. Для получения подробной информации и руководства по эксплуатации, вы можете бесплатно загрузить инструкцию с нашего сайта. manualshive.com. Легко и удобно!

Поделиться
Скачать
background image

17. APPLICATION OF FUNCTIONS 

17 -  7 

 
(3)  Setting of MR Configurator2 

To use in the J3 compatibility mode, make the system setting as follows. 

 

Operation mode in J3 compatibility mode 

System setting 

MR-J3-B standard control mode (rotary servo motor) 

Select MR-J3-_B. 

MR-J3-B fully closed loop control mode 

Select MR-J3-_B fully closed. 

MR-J3-B linear servo motor control mode 

Select MR-J3-_B linear. 

MR-J3-B DD motor control mode 

Select MR-J3-_B DDM. 

 

Cautions for using MR Configurator2 

Use MR Configurator2 with software version 1.12N or later. Older version than 1.12N cannot be used. 
Information about existing models (MR-J3) cannot be updated with the parameter setting range 
update function. Register a new model to use. 
The alarm will be displayed by 3 digits. 
The robust disturbance compensation cannot be used. 

 
17.1.6 Cautions for switching J4 mode/J3 compatibility mode 

The J3 compatibility mode of the operation mode is automatically identified by factory setting depending on a 
connected encoder. If a proper encoder is not connected at the first connection, the system will not start 
normally due to a mismatch with a set mode with the controller. (For the J4 mode, you can set the operation 
mode with [Pr. PA01].) For example, if the controller is connected without connecting a linear encoder at 
linear servo motor driving, the servo amplifier will be the standard control mode (rotary servo motor). The 
system will not start because the controller is connected with the linear servo motor driving amplifier. 
When the operation mode mismatches, the servo amplifier will display [AL. 3E.1 Operation mode error]. Set 
the mode back to the factory setting or set correctly (J4 mode/J3 compatibility mode and operation mode) 
using the application "MR-J4(W)-B mode selection". 
 
17.1.7 Cautions for the J3 compatibility mode 

The J3 compatibility mode are partly changed and has restrictions compared with MR-J3 series. 
 
(1)  The alarm display was changed from 2 digits (_ _) to 3 digits (_ _. _). The alarm detail number (._) is 

displayed in addition to the alarm No (_ _). The alarm No. (_ _) is not changed. 

 
(2)  When the power of the servo amplifier is cut or fiber-optic cable is disconnected, the same type 

communication can be cut regardless of connection order. When you power on/off the servo amplifier 
during operation, use the connect/disconnect function of the controller. Refer to the following manuals 
for detail. 

MELSEC iQ-R Motion Controller Programming Manual (Common) (R16MTCPU/R32MTCPU) (IB-
0300237) "5.3.1 Connect/disconnect function of SSCNET communication" 
Motion controller Q series Programming Manual COMMON (Q173D(S)CPU/Q172D(S)CPU) (IB-
0300134) "4.11.1 Connect/disconnect function of SSCNET communication" 
MELSEC iQ-R Simple Motion Module User's Manual (Application) 
(RD77MS2/RD77MS4/RD77MS8/RD77MS16) (IB-0300247) "8.12 Connect/disconnect function of 
SSCNET communication" 
MELSEC-Q QD77MS Simple Motion Module User's Manual (IB-0300185) "14.12 Connect/disconnect 
function of SSCNET communication" 
MELSEC-L LD77MH Simple Motion Module User's Manual (IB-0300172) "14.13 Connect/disconnect 
function of SSCNET communication" 
MELSEC-L LD77MS Simple Motion Module User's Manual (Positioning Control) (IB-0300211) "14.13 
Connect/disconnect function of SSCNET communication" 

 

Содержание MR-J4W2-0303B6













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MR-J4W2-0303B6

Technics SU-Z65 - SERVICE Service Manual preview
SU-Z65 - SERVICE
Бренд: Technics Страницы: 20
Peavey Session400/LTD Owner'S Manual preview
Session400/LTD
Бренд: Peavey Страницы: 4
Vox AmPlug User Manual preview
AmPlug
Бренд: Vox Страницы: 2
ESX vision2 Series Owner'S Manual preview
vision2 Series
Бренд: ESX Страницы: 20
Jet City JCA100H Owner'S Manual preview
JCA100H
Бренд: Jet City Страницы: 7
Axcera Innovator L Series Instruction Manual preview
Innovator L Series
Бренд: Axcera Страницы: 60
RE Audio XTX 1500.1 Owner'S Manual preview
XTX 1500.1
Бренд: RE Audio Страницы: 12
Focal FDP 4.600 Operation Configuration preview
FDP 4.600
Бренд: Focal Страницы: 8
Kingrex PREference User Manual preview
PREference
Бренд: Kingrex Страницы: 15
Harman Kardon HK6250 Tehnical Manual preview
HK6250
Бренд: Harman Kardon Страницы: 34
Altec 1606A Operating Instructions Manual preview
1606A
Бренд: Altec Страницы: 17
Forney IDD-II Manual preview
IDD-II
Бренд: Forney Страницы: 18
QRO Technologies HF-2000 Instruction Manual preview
HF-2000
Бренд: QRO Technologies Страницы: 22
L.R. Baggs Venue D.I. User Manual preview
Venue D.I.
Бренд: L.R. Baggs Страницы: 12
Parasound HCA-2003 Owner'S Manual preview
HCA-2003
Бренд: Parasound Страницы: 10
Total Control SV1304 Instruction Manual preview
SV1304
Бренд: Total Control Страницы: 2
Dynacord Power Amplifier DPA 4120 Owner'S Manual preview
Power Amplifier DPA 4120
Бренд: Dynacord Страницы: 23
Waeco ECL-76 Installation And Operating Manual preview
ECL-76
Бренд: Waeco Страницы: 196

Бренды по названию

Популярные бренды

Загрузить еще бренды