Mitsubishi Electric Melservo-J3 Series MR-J3-B, Инструкция по эксплуатации, Страница: 784 / 802

App. - 29
APPENDIX
(2) Structure
The control circuit provides safe separation to the main circuit in the servo amplifier.
MCCB MC
M
Cabinet
Magnetic contactors
Servo
amplifier
Servo motor
Molded-case
circuit breaker
24VDC
Power
supply
Reinforced
insulating type
(3) Environment
(a) Operate the servo amplifier at pollution degree 2 or 1 set forth in IEC/EN 60664-1. For this purpose,
install the servo amplifier in a cabinet which is protected against water, oil, carbon, dust, dirt, etc. (IP54).
(b) Environment
Environment Conditions
(Note 1)
Ambient
temperature
In operation
[ ] (Note 2) 0 to 55
[ ] 32 to 131
In storage, in transportation
[ ] 20 to 65
[ ] 4 to 149
Ambient
humidity
In operation,
in storage,
in transportation
90%RH or less
Maximum
altitude
In operation,
in storage
1000m or less
In transportation 10000m or less
Note 1. Ambient temperature is the internal temperature of the cabinet.
2. The servo amplifier 200V 3.5kW or less and 100V 400W or less can be mounted closely.
In this case, keep the ambient temperature within 0 to 45 (32 to 113 ) or use the
servo amplifier with 75 or less of the effective load ratio.
(4) Power supply
(a) This servo amplifier can be supplied from star-connected supply with earthed neutral point of
overvoltage category set forth in IEC/EN 60664-1. However, when using the neutral point of 400V
system for single phase supply, a reinforced insulating transformer is required in the power input
section.
(b) For the interface power supply, use a 24VDC power supply with reinforced insulation on I/O terminals.