Mitsubishi Electric Melservo-J3 Series MR-J3-B, Инструкция по эксплуатации

Страница: 721 / 802

17 - 36
17. SPEED CONTROL OPERATION
17.8 Parameter
CAUTION
Never make a drastic adjustment or change to the parameter values as
doing so will make the operation unstable.
If fixed values are written in the digits of a parameter, do not change these
values.
Do not change parameters for manufacturer setting.
Do not set values other than described setting values to each parameter.
POINT
To enable a parameter whose symbol is preceded by *, cycle the power after
setting it.
In this servo amplifier, the parameters are classified into the following groups on a function basis.
Parameter group Main description
Basic setting parameters
(No.PA
)
Make basic settings with these parameters. Generally, the operation is
possible only with these parameter settings.
Gain/filter parameters
(No.PB
)
Use these parameters when making gain adjustment manually.
Extension setting parameters
(No.PC
)
This parameter group is unique to MR-J3- T servo amplifier.
I/O setting parameters
(No.PD
)
Use these parameters for setting how to stop the stroke end (LSP and
LSN), etc.
Mainly setting the basic setting parameters (No.PA
) allows the setting of the basic parameters at the time of
introduction.