Mitsubishi Electric Melservo-J3 Series MR-J3-B, Инструкция по эксплуатации

Страница: 737 / 802

17 - 52
17. SPEED CONTROL OPERATION
No. Symbol Name and function
Initial
value
Unit
Setting
Range
PC23 For manufacturer setting
Do not change this value by any means. 0000h
PC24 Not used in speed control operation.
Do not change the parameter. 0000h
PC25 For manufacturer setting
Do not change this value by any means. 0000h
PC26 *COP5 Function selection C-5
Select the stroke limit warning (A99).
0 0 0
Stroke limit warning(A99) selection
0: Valid
1: Invalid
When "1" is set, A99 will not occur
if the forward rotation stroke end (LSP) or
reverse rotation stroke end (LSN) turns off.
0000h Refer to
the
Name
and
function
column.
PC27 For manufacturer setting
Do not change this value by any means. 0000h
PC28 Not used in speed control operation.
Do not change the parameter. 0000h
PC29 For manufacturer setting
Do not change this value by any means. 0000h
PC30 *DSS Remote register-based speed specifying method selection
This parameter is made valid when the speed specifying method selection
(RY(n+2)A) is turned on with 2 stations occupied. Select how to receive a
speed command.
When 1 station is occupied, selecting "0100" will result in a parameter error.
0
1
0 0 0
Setting Speed command
Specifying the speed selection No.
Specifying the servo motor speed
0000h Refer to
the
Name
and
function
column.
PC31 Not used in speed control operation. 0
PC32 Do not change the parameter.
PC33 0
PC34
PC35
TL2 Internal torque limit 2
Set the parameter on the assumption that the maximum torque is 100 [%].
The parameter is for limiting the torque of the servo motor.
No torque is generated when this parameter is set to "0". 100.0 % 0
to
100.0
PC36 For manufacturer setting
Do not change this value by any means. 0000h
PC37 Not used in speed control operation. 0
PC38 Do not change the parameter.