Mitsubishi Electric Melservo-J3 Series MR-J3-B, Инструкция по эксплуатации

Страница: 632 / 802

16 - 77
16. INDEXER POSITIONING OPERATION
(5) Using absolute position detection system
Parameter Initial
value
Unit Setting range
No. Symbol Name
PA03 *ABS Absolute position detection system 0000h Refer to the text.
POINT
This parameter is made valid when power is switched off, then on after
setting.
Set this parameter when using the absolute position detection system.
Selection of absolute position detection system (refer to section 16.10)
0: Used in incremental system
1: Used in absolute position detection system
Parameter No.PA03
0 0 0
(6) Servo motor speed setting unit selection
Parameter
Initial
value
Unit Setting range
No. Symbol Name
PA05 *FTY Feeding function selection 0000h Refer to the text.
POINT
This parameter is made valid when power is switched off, then on after
setting.
Select setting units for the servo motor speed.
0 0 0
Parameter No. PA05
Servo motor speed setting unit selection
0: 1r/min unit
1: 0.1r/min unit
Setting to "1" will be as follows.
The setting value of the servo motor speed will be limited to 6553.5r/min.
The "Servo motor speed" status will be displayed as 0.1r/min unit.