10
Oscilloscope function
10.2
Operation
688
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
How to select a signal source for recording:
1. Double-click a non-assigned line in the
channel list
to open the
Select signal source
dialog
box.
• Double-clicking an already pre-assigned selection enables you to assign it with another
signal source.
2. Select a new variable in the
Select signal source
dialog box.
3. Click the
OK
button.
• The dialog box is closed and the selection is accepted.
How to delete a selection:
1. Go to the
channel list
and click the signal source to be removed.
2. Right-click the
context menu
to open it.
3. Select the
Delete signal source
command in the
context menu
.
You can add so many signal sources for recording until all acht channels are assigned.
10.2.3
Selecting the recording time/sample rate
How to define the sampling rate and time base for recording:
1. Select the desired time base from the
time base
list field.
• The current time base setting multiplied by ten results in the recording time.
• Since the measured value memory of the 8400 HighLine has a limited capacity, usually a
compromise is made between sample rate and recording time.
2. Enter the desired sampling rate in [ms] in the
sampling rate
input field.