Honeywell SmartPAC 2 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 522

Honeywell SmartPAC 2 Скачать руководство пользователя страница 22

1126800

SmartPAC 2 with WPC Integration

page xviii

Table of Contents

Warranty

Honeywell International warrants that Honeywell / Wintriss electronic controls are free
from defects in material and workmanship under normal use and service for a period of
one year (two years for Shadow light curtains) from date of shipment. All software
products (PACNet and RSR), electro-mechanical assemblies, and sensors are warranted
to be free from defects in material and workmanship under normal use and service for a
period of 90 days from date of shipment. Honeywell's obligations under this warranty are
limited to repairing or replacing, at its discretion and at its factory or facility. Any
products which shall, within the applicable period after shipment, be returned to
Honeywell’s Wintriss Controls Group freight prepaid, and which are, after examination,
disclosed to the satisfaction of Honeywell, to be defective. This warranty shall not apply
to any equipment which has been subjected to improper installation, misuse,
misapplication, negligence, accident, or unauthorized modification. The provisions of
this warranty do not extend the original warranty of any product which has either been
repaired or replaced by Honeywell. No other warranty is expressed or implied.
Honeywell accepts no liability for damages, including any anticipated or lost profits,
incidental damages, consequential damages, costs, time charges, or other losses incurred
in connection with the purchase, installation, repair or operation of our products, or any
part thereof.

Please note:

It is solely the user's responsibility to properly install and maintain Wintriss controls and
equipment. Honeywell manufactures its products to meet stringent specification and
cannot assume responsibilities for those consequences arising from their misuse.
SmartPAC and modules, AutoSet load monitors, DiPro 1500, ProCam 1500, Sensors,
and PACNet are not designed or intended for use as personnel protection devices.

This product is covered by US patent #5455848.

HONEYWELL

SMARTPAC 2 WITH WPC INTEGRATION

Wintriss Controls Group

USER MANUAL

100 Discovery Way

Revision 1

Acton, MA 01720-3648

September 2003

Telephone: (800) 586-TECH (8324)

1126800

(978) 264-9550

©2003, Honeywell

Fax: (978) 263-2491

Internet: http://www.wintriss.com

«
...
20
21
22
23
24
...
»

Содержание SmartPAC 2











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов