Chapter 10. TROUBLESHOOTING
■
Alarm code display
The DCP551 is designed to alternate display of the following alarm codes and normal
display items in one-second intervals on display panel 1 when input failures or instru-
ment system failures are detected.
In cases of multiple alarm codes, display of the codes is alternated with normal display
items, starting in order from the alarm code with the smallest number.
■
Alarm classification
PV range alarm group
:
AL01
to
AL04
Measuring instrument alarm group :
AL90
to
AL99
, and battery voltage drop
(In case of battery voltage drop,
BAT
LED of the
console is flickered.)
*1:
When
AL90
is generated, the alarm code stays on and continued operation is dis-
abled.
*2:
Data checks performed by
AL93
and
AL97
may fail to detect corrupted data.
When this happens, the alarm can be turned off by entering normal data.
■
Display behavior and alarm code upon input burnout
Display behavior (upscale/downscale) and alarm code upon input burnout differ
depending on the input type.
10-2
Alarm
Alarm name
Contents
Countermeasure
code
AL01
PV1 overrange
PV1 is more than 110%FS. Check PV1.
AL02
PV1 underrange
PV1 is less than –10%FS.
AL03
PV2 overrange
PV2 is more than 110%FS. Check PV2
AL04
PV2 underrange
PV2 is less than –10%FS.
AL90
Board configuration failure Incorrect board configuration Request the repair.
AL92
Adjustment value is abnormal. Analog input/output
Request the repair.
adjustment data were broken.
AL93
Setup data is abnormal. Setup data were broken.
Check the setup data, and reset
the data.
AL94
Variable parameter is abnormal. Variable parameter were Check the variable parameter,
broken.
and reset the data.
AL95
PID parameter is abnormal.
PID parameter were broken. Check the PID parameter,
(Constant value control data is abnormal.)
and reset the data.
AL96
Program data is abnormal. Program data were broken. Check the program data,
and reset the data.
AL97
Event configuration data
Event configuration data
Check the event configuration data,
is abnormal.
were broken.
and reset the data.
AL99
PROM is abnormal. System program were corrupted. Request the repair.
Input type
Display behavior
Alarm code
Thermocouple
Upscale(110%)
AL01 or AL03
Resistance temperature detector
Upscale(110%)
AL01 or AL03
DC voltage 1V or less
Upscale(110%)
AL01 or AL03
DC voltage 5V or more
Downscale(-10%)
AL02 or AL04
DC current
Downscale(-10%)
AL02 or AL04
Содержание DCP550
