Guardall Windsor 500, Руководство по программированию

Страница: 95 / 108

Windsor 500 Programming Manual - Issue C
- 95 -
Edit page 3
ATM
Windsor can be programmed to control access to up to 4 ATMs. Access to the ATMs is
controlled by the use of special PIN codes and is restricted to the programmed times. To view
or modify the ATM options select option 2 from page 3 of the edit menus.
1=Times
The ATM menu has 2 main options.
2=Outputs
ATM menu
Times
Delay-10 There are 3 programmable times for the ATM.
Time-30
Ext Time-00
ATM
Delay-10
0-15 minutes
The ATM delay is the time between the first and second entry of the ATM user PIN code. If
zero is programmed then the ATM user PIN code can be entered twice without any waiting
period. At the end of the programmed delay period the ATM user will be prompted to re-enter
the PIN code.
ATM
Time-30
0-99 minutes
The programmed ATM time is the maximum allowed access time on the ATM. There will be a
warning given 10 minutes before the end of the programmed access time. If the programmed
time is greater than 10 minutes an extension period (if programmed) is allowed. At the end of
the access time the ATM user will be logged of automatically and all circuit bypasses will be
removed. Circuits in alarm will generate a full alarm.
ATM
Ext Time-00
0-40 minutes
An extension time may be programmed which will allow the ATM user to extend the access
time when required. Only one extension period is allowed.
ATM Menu
Outputs
1=ATM1 There are 4 programmable ATM outputs.
2=ATM2
3=ATM3
4=ATM4
ATM1
TX-0 Dev-01
0-8, 1-19