Guardall Windsor 500, Руководство по программированию

Страница: 48 / 108

Windsor 500 Programming Manual - Issue C
- 48 -
KP set mode menu
EnEx
If entry/exit (EnEx) setting is programmed for the area Windsor will attempt to set when the
user closes the final exit circuit. There is no time limit when EnEx setting.
KP set mode menu
EnEx/Tm
If EnEx/Tm setting is programmed an exit time in the range 1-255 seconds must also be
programmed.
If entry/exit or timed (EnEx/Tm) setting is programmed for the area Windsor will attempt to set
when the user closes the final exit circuit or when the exit timer terminates, whichever is first.
If the EnEx circuit is open at the end of the exit time setting will fail.
KP set mode menu
Unset
If the KP set mode is programmed for unset only then Windsor will not display the area in the
set menu. A valid user would still be allowed to unset, view the area log and reset. Unset
mode cannot be programmed for the system.
KP menu
Logon TX
Each keypad can be assigned a programmable output which is activated when a user logs on
to the keypad. The programmable output can be programmed with an on time.
KP-n Logon
TX-0 Dev-1
0-8, 1-19
On Time-005 001-255 seconds
This option is intended to be used in conjunction with the user timed access option.
KP menu
Logon/Unset
When a user logs onto a keypad when an area(s) is unsetting the area(s) which the
user/keypad authority allows will be unset automatically. In software versions prior to v3.00
areas which are configured for non-instant setting (e.g. timed) would be automatically unset
even if the area was not unsetting. In version 3.00 Windsor will only automatically unset an
area(s) if the area(s) is programmed for LogOn/Unset or the area entry timer has started.
Keypad-n
Area 1- Off ....
On/Off