Guardall Windsor 500, Руководство по программированию

Страница: 84 / 108

Windsor 500 Programming Manual - Issue C
- 84 -
EvProg Areas Menu
HS Options
EvProg Area-n
Schedule-n
0-4
Set Flt-Off On/Off
Set Warn 1-10 0-30 minutes
Set Warn 2-10
0-30 minutes
Set Delay-00
0-99 minutes
Alarm Unset-Off
On/Off
Shnt Group-0 0-6
Vault Timer-000 0-255 minutes
EvProg Areas Menu
Schedule
Each area can have a programmed schedule applied. A schedule consists of a number of
programmable times for each day of the week which have an associated action, for example,
automatic setting. If no event programmer schedule is required for an area enter 0.
EvProg Area-n
Schedule-0
0-4
The same programmed schedule can be applied to more than 1 area.
EvProg Areas Menu
Set Flt
An area configured for auto setting may also be configured to set with faults. If the set with
faults option is programmed and there are setting faults the auto set fail TX output will be
activated when the area sets. Any circuits in alarm, which is programmed for temp bypass, will
be temporarily bypassed until the circuit(s) clears. If setting is not allowed with faults present
the auto set fail transmitter channel will be activated to indicate that setting has failed.
EvProg Area-n
Auto Set Flt-Off
On/Off
EvProg Areas Menu
Set Warn 1/2
Windsor can be programmed to give a set warnings prior to the set 1 and/or the set 2 time The
set warning time is programmable in the range 0-30 minutes (enter 0 if no set warning is
required). During the warning period the keypad(s) bleeper and the set warning LED(s) will be
on. If programmed the area set warning transmitter output will also be on. The set warning is
cancelled if the area is set, if the user selects a later working time or the set time is reached
and the area is not set.
EvProg Area-n
Set Warn 1-10
00-30 minutes