Guardall Windsor 500, Руководство по программированию

Страница: 30 / 108

Windsor 500 Programming Manual - Issue C
- 30 -
for any number of concentrators. If output 3 is programmed for any other function then the
device number is the concentrator number to be used for the circuit data. For example if
concentrator 1 output 3 is programmed for the Cct Status of device number 8 then the
concentrator 1 daughter board outputs will follow the status of circuits 56-64 (the concentrator
8 inputs). The programmed device number for an output programmed for a circuit
function should not be greater than the maximum number of concentrators in the
system.
Concentrator Variants
Although any type of Guardall concentrator may be used with Windsor there are some
important differences between the different concentrator variants. The main differences are
outlined in the following tables.
Variant Method of selecting the address
Windsor Shunt Links
Vigil Mk2 DIL Switch
Sovereign/Vigil Mk1 Cutable diode links
Internal Programmed from a keypad
Concentrator Addressing
Windsor Address Sovereign Address Vigil Address
1 On Board 1
2 1 3
3 3 5
4 5 7
5 7 9
6 9 11
7 11 13
8 13 15
9 not available 17
10 not available 19
11 not available 21
12 not available 23
13 not available 25
14 not available 27
15 not available 29
16 not available 31
Concentrator Output 1 & 2 References
Windsor Sovereign Vigil
O/P1 PL10 PL10
O/P2 PL11 PL11
not available PL9 PL9