Guardall Windsor 500, Руководство по программированию

Страница: 83 / 108

Windsor 500 Programming Manual - Issue C
- 83 -
Edit page 3
EvProg
Windsor can be controlled by a timed schedule called the event programmer (and abbreviated
EvProg). There are two versions of the event programmer, the commercial in the Windsor 128
and the high security in the Windsor HS. The event programmer in version 3 differs in several
important ways from previous versions. The main differences are;
•
the start time of the schedule is programmable allowing operation through midnight
(previously fixed at midnight).
•
there are now 4 timer schedules which can be programmed and applied to any number of
areas (previously times were fixed for each area).
•
there are now 2 programmable open/close periods in the HS version and 2 programmable
set/unset periods in the commercial version.
•
the schedule times can be entered in any order and any schedule action can be omitted by
programming a time of 00:00 (previously times had to be chronological and all times had to
be entered)
•
Omit is now selected by programming an open 1 time of 00:00.
•
Permanent late working is programmed by a Set 2 time and no Set 1 time.
The event programmer main menu options are shown below.
0=Copy
Select this option to copy a schedule to other schedule(s)
1=Areas
Select this menu to set the area control options.
2=Schedule
Select this option to program all schedule times
3=Holiday Select this option to program holiday periods.
4=Start Time Select this option to program the schedule(s) start time
5=User Edit Select this option to allow a user to edit a schedule(s)
EvProg Menu
Copy EVP
There is a copy facility to copy a complete schedule to a range of schedules.
Copy EVP __ to
the schedule to be copied
Frst __ Lst __
the copy range
EvProg Menu
Areas
To program an area schedule select the areas option from the event programmer main menu
and then enter the area number.
1=Area 1
2=Area 2 ...
The area menu options for the HS and commercial event programmer are different. Please
refer to the individual EvProg Area menu section for details.