Fluke 6135A/PMU, Руководство оператора

Страница: 67 / 160

Software Operation
Test Results and Results Files
3
3-25
The active test results file values can be seen on the results screen (see Figure 3-23). The
maximum values are used to verify that the performance parameters are in the specified
range limits. If test data was not recorded for a test or subtest, then data is not shown for
that test. The PMUCal Software continues to update the active results file with maximum
values for each test run until a new results file is chosen (refer to “Result File Save
Options” in this section).
gtu086.jpg
Figure 3-23. Example Test Results
Results Files Naming Convention
The filename of the test results file shows the date and time when the test was started and
what kind of test was completed. Each results file has a timestamp followed by the name
of the test method or filename of the test run. Figure 3-24 illustrates the results file
naming convention.
gtu066.jpg
Figure 3-24. Master Test Results File Naming Convention