Fluke 6135A/PMU, Руководство оператора

Страница: 14 / 160

6135A/PMU
Operators Manual
1-10
Components of the Calibration System
Client PC
The Client PC is the personal computer used to operate the Calibration System.
Note
The Client PC is not supplied with the Calibration System.
The Client PC must meet the minimum requirements listed in Table 1-4 and have the
Calibration Software installed (see “Install the Calibration Software” in Chapter 2).
The Client PC can be directly connected to the Server PC or network (see Figure 1-3).
See Chapter 2 for instructions on how to set up a network or a direct connection.
To use the Client PC with the Calibration System, the Client PC must meet the minimum
requirements in Table 1-4.
Table 1-4. Client PC Minimum Requirements
PC Component Minimum Requirement Additional Information
Operating System Microsoft Windows 7 -
Processor Speed 2 GHz -
Memory (RAM) 4 GB -
Hard Drive Free Space 500 GB Report data is stored on the Client PC
Over time some results data may need
to be copied to an archive and removed
to ensure the Client PC has sufficient
free space.
Network Connection Bandwidth of 300 KB a
second
-
DVD Drive 32X Speed Used to install the Calibration Software.
Microsoft Excel 2010 or newer Used for test reports.