Fluke 6135A/PMU, Руководство оператора

Страница: 132 / 160

6135A/PMU
Operators Manual
7-14
Test Results
Test Results Viewer
The test results viewer (Show Results button) is a spreadsheet view of the test results that
shows maximum test results for each compliance test and subtest. The results viewer
shows the test results in the active results file that is shown in the result file path in the
top navigation menu. Test results are saved to the active test results file as tests are
completed.
gtu086.jpg
Figure 7-13. The Test Results Viewer
View Test Results in the Results Viewer
To view test results, click
Results
on the top navigation menu then select
Show
Results
. At least one test must be run to see data in the spreadsheet. The results file
saves test results for interactive and automated tests (refer to “Test Results and Results
Files” in Chapter 3). The data in the spreadsheet is in scientific notation. The number
after the “E” is the exponent (Example: 2.34E-11 is 2.34
-11
).
When you click Results on the top navigation menu, the test results data is automatically
imported from the active test results file shown in the result file. The limits for each test
in
IEEE C37.118.1a-2014
are shown in the limits column of the spreadsheet. When the
test results data is imported, the data is compared to the data in the limit column. If the
data is above the acceptable limits, the data is shown in red. Red indicates that the test did
not pass. Parameters inside the limits that passed are shown in green.