Fluke 6135A/PMU, Руководство оператора

Страница: 66 / 160

6135A/PMU
Operators Manual
3-24
Automated Test List Files
The automated test list files are saved in “Automated” folder. Figure 3-21 illustrates the
automated test list naming convention.
AutomatedTest List Files Naming Convention
Automated Test List:
File Path: ..\ Tests\Automation
Example: 50F0_10Fs_P_Complete.xml
00F0_00Fs_X_Complete.xml
Nominal
Frequency
Reporting
Rate
PMU Class
(M or P)
gtu115.emf
Figure 3-21. Automated Test List Naming Convention
Test Results and Results Files
The PMUCal Software writes test results to a results file in the results folder. It also
creates a test log file in the results folder. The Calibration Software saves raw test data
for each test completed. For each UUT report analyzed, the raw test data contains:
•
Data received from the UUT.
•
Reference data representing the Timing Unit signal inputs to the UUT.
•
Test parameters which determines the Timing Unit signal input to the UUT.
For more information, refer to “Raw Data Files” in this section.
See the subsequent sections for information on the test results file storage directory, file
directory folder structure, and file naming convention.
About Result Files and the Active Results File
A test results file contains test results from tests completed on a UUT, thus the results file
is saved to the active UUT personality results folder (see Figure 3-26). The results file is
an Extensible Markup Language (XML) file and is formatted with placeholders to save
the test results for each compliance test and subtest (see Figure 3-23).
Each time the PMUCal Software is used, the operator must choose to make a new results
file or save to a results file already made (refer to “Result File Save Options” in this
section). After a selection is made, the results file selection window closes and the results
file path is shown under the top navigation menu (see Figure 3-22). The file shown in the
results file path is referred to as the “active results file”. Each time you run a new test, the
data in the active results file is updated with the new maximum values for the test or
subtest completed.
gtu085.jpg
Figure 3-22. Active Results File Path and File