Fluke 6135A/PMU, Руководство оператора

Страница: 53 / 160

Software Operation
Testing Methods
3
3-11
Testing Methods
A UUT can be tested with one of three methods: automated testing, general interactive
testing, or custom interactive testing. To certify and verify a UUTs performance, the
automated testing method must be used. Selection of a testing method depends on the test
requirements and what format test results must be in. The testing methods and test
features are compared in Table 3-2.
Table 3-2. Testing Method Comparison
Testing Method Features
Certification Testing
Certification testing can:
•
Test the UUT against all the performance standards in
IEEE C37.118.1a-2014 for each class, nominal
frequency, and reporting rate.
•
Make a formal certification report.
Note
The certification test sequence is defined by the
requirements in IEEE C37.118.1a-2014, Synchrophasor
Measurements for Power Systems Specification and
cannot be changed.
Automated Testing
Automated testing can:
•
Run a large number of tests without interaction.
•
Test the UUT against the performance standards in
IEEE C37.118.1a-2014.
•
Open and customize the test results in a formatted
Microsoft Excel Spreadsheet.
•
Make a new or change an automated test list.
•
View the results compared to the test limits on the results
screen.
•
Plot the data from a test run from the results log screen.
General Interactive Testing
General interactive testing can:
•
Run a single pre-configured test on the UUT.
•
See the test results in an interactive graph that can be
customized.
•
View the results compared to the limits on the results
screen.
Custom Interactive Testing
Custom interactive testing can:
•
Run a single pre-configured test on the UUT.
•
Make a new test or load and change a test.
•
Run tests and change test parameters before they are
saved to fine-tune test configurations.
•
Help you troubleshoot a UUT.
•
View the results compared to the test limits on the results
screen.