Fluke 6135A/PMU, Руководство оператора

Страница: 111 / 160

General Testing
Test Configuration Instructions
6
6-9
Table 6-3. Steady State Test Configuration Window
gtu125.emf
Item Field Name Range Description

Input Frequency (44.0 to 65.9) Hz Set the test frequency.

Phase Shift
(-180
°
to 180
°
)
degrees
Set the phase offset at the test start. All
test signals are specified to be cosine
waves.

Voltage Magnitude Index (0 to 150) %
Set the percent of the nominal voltage that
the 6135A System outputs.

Current Magnitude Index (0 to 200) %
Set the percent of the nominal current that
the 6135A System outputs.

Harmonic Number (2 to 100)
Set a harmonic to the 6135A System
voltage and current outputs.

Harmonic Phase
(-180
°
to 180
°
)
degrees
Set the phase of the added harmonic
relative to the fundamental phase.

Harmonic Index (0 to 40)
%
Set the magnitude of the added harmonic
as a percentage of nominal magnitude.

Interharmonic Frequency (0 Hz to 9 kHz)
Set a single interharmonic frequency to the
6135A System voltage and current
outputs. Use this for the out-of-band
interfering signals tests.

Interharmonic Phase
(-180
°
to 180
°
)
degrees
Set the phase of the interharmonic signal
relative to the fundamental phase.

Interharmonic Index (0 to 40)
%
Set the magnitude of the interharmonic
signal as a percentage of the nominal
magnitude.