Fluke 6135A/PMU, Руководство оператора

Страница: 118 / 160

6135A/PMU
Operators Manual
6-16
Run a Custom Interactive Test
1. Click
Test
in the top
Navigation Menu
.
2. Click
Customize and Run Single Test
. A Windows Explorer dialog box opens.
3. Load a test file with similar test parameters (if desired):
a.
Navigate to the test file in the test folder.
b. Select the test file.
c. Click
OK
.
4. Set the
General Test Parameters
(use the instructions in “General Test
Parameters” in this chapter).
5. Set the
Test Parameters
(use the instructions in “Test Parameters” in this chapter).
6. Click
Save
to save the test (if desired).
7. Click
Run Test
to run the test on the UUT or click
Simulate
to run the test on the
PMU simulator. The test starts and a progress window opens.
8. After the test is complete, configure the graph configuration window (refer to “Make
an Interactive Graph” in Chapter 7).