Fluke 6135A/PMU, Руководство оператора

Страница: 36 / 160

6135A/PMU
Operators Manual
2-10
Direct Connection Instructions
When a network is not available, the Calibration System can be connected directly to a
PC.
To set up a direct connection:
1.
Connect the Client PC directly to the Server PC. To do this, connect one end of an
Ethernet cable to right most Ethernet port on the Input/Output Panel. Connect the
other end of the cable to the Client PC the as shown in Figure 2-2.
2. Turn on the Calibration System (see “Turn On the Calibration System” in Chapter 4).
3. On the Client PC, assign the IP address of the Calibration System as follows:
a.
Open the
Windows Start Menu
and type “
network and sharing
” in the search
box.
gtu166.jpg
b. Click
Network and Sharing Center.
gtu167.jpg
c. On the Network and Sharing Center menu, click
Change Adapter Settings
.
The Network Adapter menu opens.
gtu168.jpg