Fluke 6135A/PMU, Руководство оператора

Страница: 55 / 160

Software Operation
Testing Methods
3
3-13
Automated Testing
An automated test runs a list of tests one-by-one without the need for operator
interaction. As the tests are completed, the Calibration Software saves or overwrites the
maximum test results values to the active results file (refer to “Standard Compliance
Tests and Test Files” in this Chapter). Figure 3-10 shows the automated tests setup dialog
that contains the list of test files and the buttons to manage the files in the list.
gtu071.jpg
Figure 3-10. Automated Testing Menu and Screen
The Calibration Software comes with a full set of automated test list files that are
configured to run all the compliance tests listed in
IEEE C37.118.1a-2014,
Synchrophasor Measurements for Power Systems Specification
(see “Standard
Compliance Tests and Test Files” in this chapter). The automated test list files that come
with the Calibration Software can be changed to suit the calibration requirements. The
operator can create new automated test list files for special purposes such as production
testing or UUT design regression testing.
For instructions on how to do an automated test, see Chapter 5.
General and Custom Interactive Test Methods
The Calibration Software supplies two methods to do an interactive test: general
interactive testing and custom interactive testing. Read the subsequent sections for a
comparison of the two methods.