Fluke 6135A/PMU, Руководство оператора

Страница: 38 / 160

6135A/PMU
Operators Manual
2-12
Note
The Alternate Configuration tab only shows if the PC is set up to
automatically obtain an IP address (DHCP). If the PC has an IP assigned
by the network administrator, use the address in the General tab. Record
the current addresses so they will not be lost.
g. Select the radio button to the left of
User configured
. Fill in the fields as
follows:
•
IP address:
192.168.0.1
• Subnet mask:
255.255.255.0
•
Default gateway:
192.168.0.250
Note
If the “Alternate Configuration” tab is not shown on the menu, it is OK to
use these IP addresses in the General tab.
gtu171.jpg
h. Uncheck
Validate settings, if changed, upon exit
and click
OK
.
i. Wait 5 minutes for the Client PC to make a connection to the Server PC.
Note
After the connection is made, Windows automatically opens the Set
Network Locations dialog that lets you set a network location. Set the
network location to “Work” or “Home Network”. If this dialog does not
automatically open, continue to the “Set Location of Network” section.