Fluke 6135A/PMU, Руководство оператора

Страница: 115 / 160

General Testing
Test Configuration Instructions
6
6-13
Step Test Parameters
A Step Test is a dynamic test that tests the UUTs response to steps in magnitude or phase.
(see “Standard Compliance Tests and Test Files” in Chapter 3 for more information). See
Table 6-6 for a detailed description of each step test Parameter.
To configure a Step Test (refer to Table 6-6):
1.
Set the
General Test Parameters
. (refer to “General Test Parameters” in this
section).
2. Click
Step Tests
.
3. Set the
Step Test Parameters
as follows:
a. Set the
Input Frequency
.
b. Set the
Phase Shift
.
c. Set the
Phase Step Size
.
d. Set the
Phase Amplitude Step Size
.
e. Set the
Step Time – Seconds Until Step
.
f. Set the
Step Time – Number of Steps
.
4. Click
Save
to save the test (if desired).
5. Run the test. Refer to the instructions in “Run a Custom Interactive Test” in this
chapter.