Fluke 6135A/PMU, Руководство оператора

Страница: 57 / 160

Software Operation
Testing Methods
3
3-15
gtu072.png
Figure 3-12. Test Configuration Window
Interactive Test Sequence of Events
Run the Test
When
Customize and Run Single Test
is clicked, the PMUCal Software opens the
test configuration window. From here, the test parameters can be changed and the test can
be run or simulated. When
Run Test
or
Simulate
is clicked on the test configuration
window (see Figure 3-12), the PMUCal Software completes the test and saves the test
results to the active results file in the results folder. While the test is in progress, a test
status screen is shown (see Figure 3-13) that shows the test information as it is collected.
gtu073.jpg
Figure 3-13. Test Progress Screen