Fluke 6135A/PMU, Руководство оператора

Страница: 56 / 160

6135A/PMU
Operators Manual
3-14
General Interactive Testing
General interactive testing (see Figure 3-11) is a basic test method that loads a single,
preconfigured test file and interactively graphs the test results. When
Run Single Test
is
clicked, the PMUCal Software loads a test from a file that you select and runs the test
with the test parameters saved in the file. Use general interactive testing to show the
currently loaded test parameters, load a different test file, and then closely evaluate the
test data with the interactive graphing tools.
gtu082.jpg
Figure 3-11. Run Single Test Window
Custom Interactive Testing
Custom interactive testing (see Figure 3-12) is an advanced test method to view and
change test parameters and run tests instantaneously. When
Customize and Run
Single Test
is clicked, the PMUCal Software opens the test configuration window.
Note
Custom interactive testing is to help Engineers and Metrologists troubleshoot and
calibrate a UUT. The test configuration window used for custom interactive
testing is very complex and has advanced test options that can cause inaccurate
results if not configured correctly.
For instructions on how to do a general interactive or custom interactive test, see
Chapter 6.