Fluke 6135A/PMU, Руководство оператора

Страница: 12 / 160

6135A/PMU
Operators Manual
1-8
Calibration System Overview
The Calibration System is a measurement and calibration device that calibrates and tests
a PMU. The Calibration System simulates static and dynamic conditions that a UUT can
experience in a power grid and can test a UUT against the performance standards written
in
IEEE C37.118.1a-2014 (Synchrophasor Measurements for Power Systems)
and
IEEE C37.118.2 (Synchrophasor Data Transfer for Power Systems)
.
The Calibration System is made up of six individual devices that are interconnected
inside a server rack (see Figure 1-2). Figure 1-3 shows a system wiring schematic of how
each device is interconnected. See “Components of the Calibration System” in this
chapter for more information about each individual device.
6106A Electrical Power
Standard #1
(the “6106A Auxiliary Unit 1”)
6106A Electrical Power
Standard #2
(the “6106A Auxiliary Unit 2”)
6105A Electrical
Power Standard Master Unit
(the “6105A Master Unit”)
6135A/PMU SystemTiming Unit
(the “Timing Unit”)
Server PC
(the “Server”)
Microsemi SyncServer S650
(the “GPS Reciever”)
Input/Output Panel
(Shown Above)
CAL SERVER
RUNNING
CLIENT
CONNECTED
CLIENT
TCP / IP COMMS
PMU SERVICE
RUNNING
TIMING UNIT
SERVICE RUNNING
6135
SERVICE RUNNING
6135A / PMUCAL PHASOR MEASUREMENT UNIT CALIBRA TION SYSTEM
gtu009.emf
Figure 1-2. The Calibration System