Fluke 6135A/PMU, Руководство оператора

Страница: 42 / 160

6135A/PMU
Operators Manual
2-16
Install the Test Files
The test files used by the system are supplied separately. They can be found in a .zip file
in the Test Files folder on the Calibration System software installation CD-ROM.
To install the test files:
1. Click on the
Install Test Files
button.
2. Navigate to the “Test Files" folder of the Calibration System software installation
CD.
3. Highlight the required zip file as shown in Figure 2-4.
4. Click on
Select File
to start the installation process.
5. A “File transfer complete” message will appear once the test files have been
successfully installed.
gtu144.jpg
Figure 2-4. Test File Selection
After both the folders have been created and tests installed, click “Close” to close the
folder location settings dialog box. Follow the instructions in Chapter 4 to use the Startup
menu to connect to the Server PC and a UUT.
Folder location settings can be changed or new test files installed at a later date as
follows:
1. Open the Calibration Software.
2. Click
Settings
in the Main Menu.
3. Click
File and Folder Settings
.