Fluke 6135A/PMU, Руководство оператора

Страница: 108 / 160

6135A/PMU
Operators Manual
6-6
Test Configuration Instructions
Use this section to configure a custom interactive test. To configure a test, you must
select a test type and set the general test parameters and also the UUT test parameters.
General Test Parameters
General test parameters specify the type of test and test timing parameters for each test
file. Table 6-2 shows and describes each general test parameter. Use the procedure in this
section and the information in subsequent sections to configure the general test
parameters.
To set the general test parameters (refer to Table 6-2):
1.
Set the
Test Type
(refer to “Test Type Parameter” in this section).
2. Set the
Test Timing
parameters.
Table 6-2. General Test Parameters
gtu123.emf
Item Name Description

Test Timing Parameters The test duration is the period that the test data is collected for analysis.

UUT Configuration
Settings Indicators
Use to see the UUT personality and UUT configuration settings. The
settings are for reference only cannot be changed from this window.

Test Type
Use to see and select the test type. Each test file can have one test type
selected. Refer to “Test Type Parameter” in this section for more
information.