Fluke 6135A/PMU, Руководство оператора

Страница: 99 / 160

Automated Testing
Incomplete Tests
5
5-7
7. Click
Run Incomplete Tests
to run all of the incomplete tests.
Notes
After “Run all Incomplete Tests” is clicked, the PMUCal Software runs all
the tests with an incomplete status of “Cancelled”, “Failed”, or “Error”.
After the test is finished, the test statuses refresh. If a test still shows
“Failed” or “Error,” it is possible that the test parameters are out of range
for the UUT. To resolve this issue and adjust the parameters, click on the
test name to modify the test settings. A test with a “pass” status can be
modified the same way, but the PMUCal Software will not run the test
again unless it has an incomplete status.
If there are no skipped or incomplete tests to run, a dialog box opens that
says “There are no Skipped or Aborted test files to run”.
W
Caution
To prevent inaccurate test results, never change the UUT
configuration after you start an automated test and do not
change the UUT configuration to pass a single test. If a test
does not pass, use the plots or click on “Edit” to run it as an
interactive test to troubleshoot why the test fails. A test failure
indicates that the UUT is not in accordance with the
performance parameters found in IEEE C37.188.1a-2014.
gtu112.jpg
Figure 5-5. Test Status Log Example