Pearl Mini User Guide
Configure a static IP address
Configure a static IP address using the Admin panel
1. Login to the Admin panel as
admin
, see
2. From the Configuration menu, select
Network
. The Network configuration page opens.
3. Choose
No
from the
Use DHCP
drop-down and enter your networking information in to the
required fields. Click
Apply
when you're done.
Table 19
Static IP Address Fields
Label
Description
Use DHCP
Select
Yes
to dynamically obtain an IP address at boot up or select
No
to use the
configured static IP address.
IP Address
The internet protocol address (IP Address) to assign. Obtain this from your
network administrator. Pearl devices support IPv4 addresses. They do not support
IPv6 addresses.
Network Mask
Also called the subnet mask, this value denotes a range of IP addresses. Obtain
this from your network administrator, from another computer on the same
subnet, or calculate the value using an online subnet calculator.
Default gateway
The network node that serves as an access point to the rest of the network. This
value cannot be blank unless you are using DCHP. Specify the system’s IP address
if you don’t have a default gateway on your network.
102
