Pearl Mini User Guide
Configure AFU to RSync server parameters
Name
Description
module
Login
Username for the RSync server.
Password
Password for the RSync user.
Checksum
Select to enable checksum checking during file transfer. This increases the time taken
to transfer, but also increases reliability of the transfer.
Prerequisites
l
Channels and recorders are already added for AFU, see
Set channels and recorders to include in
.
l
AFU is enabled and the parameters configured, see
Enable AFU, schedule, and set options
Configure AFU upload to an RSync server using the Admin panel
1. From the Automatic File Upload configuration page, select
RSync Client
as the protocol transfer
type.
2. Specify the target
Server address
. If your system is configured with DHCP or has a valid DNS
configuration (see
), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the
Server module
. This is the name of the shared folder on the server. If needed, request
this value from your network administrator.
4. Specify a username for the RSync Server in the
Login
field. The user must have write permissions
for the module.
369
