Pearl Mini User Guide
Configure AFU to CIFS server parameters
5. Specify the password for the user in the
Password
field; the value is masked by dots.
6. (Optional) Select the
Checksum
check box to add a checksum validation to the transfer between
the system and the recipient server.
7. Click
Apply
.
Configure AFU to CIFS server parameters
You can automatically upload recordings to a CIFS server (also known as SMB or samba) when you select
CIFS as the AFU protocol transfer type using the Admin panel. SMB2 and SMB3 are supported.
The following table describes the parameters to configure AFU to a CIFS server.
Table 66
CIFS Automatic File Upload Configuration Parameters
Name
Description
Server Port
The CIFS server port. Leave blank to use the default port, or enter the port used for
your CIFS server.
Server
address
The IP address (or fully qualified domain name) of the CIFS server.
Server share
The name of the shared folder on the CIFS server.
Domain
The CIFS server's Windows domain or Work Group name . Needed if the server is part
of Active Directory or a Domain Controller.
Login
Username for the CIFS server.
Password
Password for the CIFS user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4, .ts
or .avi).
Prerequisites
l
Channels and recorders are already added for AFU, see
Set channels and recorders to include in
.
l
AFU is enabled and the parameters configured, see
Enable AFU, schedule, and set options
370
