Canon BJ-W9000, Руководство по обслуживанию

Страница: 330 / 455

Part 5: Maintenance BJ-W9000
5-110
J206
Pin No. Signal IN/OUT Function
1 GND –– GND
2 GND –– GND
3 XPOS-M2C OUT Backup for check
4 GND –– GND
5 reserve6 –– Reserve 6
6 GND –– GND
7 reserve5 –– Reserve 5
8 GND –– GND
9 H5V-ON OUT Head 5V control signal
10 GND –– GND
11 H5V-ON OUT Head 5V control signal
12 GND –– GND
13 LF-ENCV OUT Paper feed motor encoder signal
14 GND –– GND
15 SDT-S2C OUT Serial communication data signal (from system
controller to carriage controller )
16 GND –– GND
17 SCK-S2C OUT Non-jetting detection control signal (from
system controller to carriage controller)
18 GND –– GND
19 XCS-C OUT Serial communication control signal (carriage
controller)
20 GND –– GND
21 XRESET OUT External reset signal
22 GND –– GND
23 XLOWPWR OUT Power saving mode control signal
24 GND –– GND
25 SDT-RS2BF –– Backup for check 4
26 GND –– GND
27 SDT-C2RS –– Backup for check 3
28 GND –– GND
29 reserve2 –– Backup for check 2
30 GND –– GND
31 reserve1 –– Backup for check 1
32 GND –– GND
33 XFT-TRG IN Non-jetting detection trigger signal
34 GND –– GND
35 XIRQ-C2S IN Interrupt request signal (from carriage
controller to system controller)
36 GND –– GND
37 XBSY-C2S IN Serial communication control signal (from
carriage controller to system controller)
38 GND –– GND
39 SDT-C2S IN Serial communication data signal (from
carriage controller to system controller)
40 GND –– GND
41 CR-ENCB IN Carriage encoder B phase signal
42 GND –– GND
43 CR-ENCA IN Carriage encoder A phase signal
44 GND –– GND