Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 887 / 2354

OSPF Commands show ip ospf
OmniSwitch CLI Reference Guide March 2011 page 17-53
Release History
Release 7.1.1; command was introduced.
output definitions
Router Id The unique identification for the router.
OSPF Version Number The version of OSPF the router is running.
Admin Status Whether OSPF is currently enabled or disabled on the router.
Area Border Router? Whether the router status is an area router or not.
AS Border Router Status Whether the area Autonomous System Border Router status of this
router is enabled or disabled.
Route Redistribution Status Whether route redistribution is enabled or disabled on the router. This is
set using the
ip ospf default-originate command.
Route Tag Shows the route tag for this router.
SPF Hold Time Shows the time in seconds between the reception of an OSPF topology
change and the start of a SPF calculation.
SPF Delay Time Shows the time in seconds between consecutive SPF calculations.
MTU Checking Shows whether Maximum Transfer Unit checking is enabled or dis-
abled. This is set using the
ip ospf mtu-checking command.
# of routes The total number of OSPF routes known to this router.
# of AS-External LSAs The number of external routes learned from outside the router’s Auton-
omous System (AS).
# of self-originated LSAs The number of times a new Link State Advertisement has been sent
from this router.
# of LSAs received The number of times a new Link State Advertisement has been received
by this router.
External LSDB Limit The maximum number of entries allowed in the external Link State
Database.
Exit Overflow Interval The number of seconds the router remains in the overflow state before
attempting to leave it. This is set using the
ip ospf exit-overflow-
interval command.
# of SPF calculations done The number of SPF calculations that have occurred.
# of Incr SPF calculations
done The number of incremental SPF calculations done.
# of Init State Nbrs The number of neighbors in the initialization state.
# of 2-Way State Nbrs The number of OSPF 2-way state neighbors on this router.
# of Exchange State Nbrs The number of neighbors in the exchange state.
# of Full State Nbrs The number of neighbors in the full state.
# of attached areas The number of areas that are configured on the router.
# of Active areas The number of areas that are active.
# of Transit areas The number of transit areas that are configured on the router.
# of attached NSSAs The number of Not So Stubby Areas that are configured on the router.