Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 280 / 2354

linkagg lacp agg partner system-id Link Aggregation Commands
page 6-22 OmniSwitch CLI Reference Guide March 2011
linkagg lacp agg partner system-id
Configures the MAC address of the dynamic aggregate group of the remote system that is attached to the
dynamic aggregate group of the local switch.
linkagg lacp agg agg_num1 [-agg_num2] partner system-id partner_system_id
no linkagg lacp agg agg_num1 [-agg_num2] partner system-id
Syntax Definitions
agg_num1 The number corresponding to the dynamic aggregate group on the
switch.
-agg_num2 The last link aggregate ID in a range of link aggregate IDs.
partner_system_id The MAC address of the dynamic aggregate group of the remote switch
in the hexadecimal format
xx:xx:xx:xx:xx:xx .
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a partner system ID from a dynamic aggregate group or a
range of groups assigned with the same partner system IDs together.
•
The partner_system_id and the partner_system_priority together specify the priority of the remote
system.
•
You can configure a partner system ID for a range of dynamic link aggregate IDs simultaneously. Use
a hyphen to separate the first and last link aggregate IDs of a range along with this command.
Examples
-> linkagg lacp agg 2 partner system-id 00:20:da4:32:81
-> linkagg lacp agg 2-10 partner system-id 00:20:da4:32:82
-> no linkagg lacp agg 2-10 partner system-id
Release History
Release 7.1.1; command introduced.
parameter default
partner_system_id 0