Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1908 / 2354

port-security port maximum Learned Port Security Commands
page 30-6 OmniSwitch CLI Reference Guide March 2011
port-security port maximum
Specifies the maximum number of source MAC addresses that an LPS port(s) is allowed to learn.
port-security port slot/port[-port2] maximum number
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
-port2 The last port number in a range of ports you want to configure on the
same slot (for example, 3/1-4 specifies ports 1-4 on slot 3).
number The number of source MAC addresses that are allowed on this port.
Defaults
By default, the number of MAC addresses allowed is set to 1.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If the port attempts to learn a MAC address that exceeds the maximum number allowed, the port blocks
the unauthorized address or a shutdown occurs. Use the
port-security port violation command to
specify how an LPS port handles violating traffic.
•
Note that source learning of configured authorized MAC addresses is still allowed after the LPS time
limit has expired; however, all learning is stopped if the number of MAC addresses learned meets or
exceeds the maximum number of addresses allowed, even if the LPS time limit has not expired.
Examples
-> port-security 2/14 maximum 25
-> port-security 4/10-15 maximum 100
Release History
Release 7.1.1; command introduced.