Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 437 / 2354

IP Commands traceroute
OmniSwitch CLI Reference Guide March 2011 page 10-19
traceroute
Finds the path taken by an IP packet from the local switch to a specified destination. This command
displays the individual hops to the destination as well as some timing information.
traceroute {ip_address | hostname} [max-hop max_hop_count] [min-hop min_hop_count] [source-
interface ip_interface] [probes probe_count] [timeout seconds] [port port_number_value]
Syntax Definitions
ip_address IP address of the host whose route you want to trace.
hostname DNS name of the host whose route you want to trace.
max_hop_count Maximum hop count for the trace. The valid range is 1–255.
min_hop_count Minimum hop count for the trace. The valid range is 1–30.
source-interface ip_interface Source IP interface to be used in the traceroute packets.
probes probe_count The number of packets (retry) that will be sent for each hop-count. The
valid range is 1–10000.
timeout seconds The time to wait for the response of each probe packet.
port port_number_value The destination port number to be used in the probing packets.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When using this command, you must enter the name of the destination as part of the command line
(either the IP address or host name).
Examples
-> traceroute 128.251.17.224
traceroute to 128.251.17.224, 30 hops max, 40 byte packets
1 10.255.11.254 0 ms 0 ms 0 ms
2 172.23.0.251 0 ms 16.6667 ms 0 ms
parameter default
max-hop max_hop_count 30
min-hop min_hop_count 1
source-interface ip_interface Outgoing IP
interface as per
route lookup
probes probe_count 3
timeout seconds 5
port port_number_value 33334