Alcatel-Lucent 060321-10, Rev. B, Справочное руководство CLI

Страница: 1103 / 2354

BGP Commands ip bgp policy route-map match-mask
OmniSwitch CLI Reference Guide March 2011 page 19-135
ip bgp policy route-map match-mask
Configures a matching mask primitive in the route map.
ip bgp policy route-map name sequence_number match-mask ip_address
Syntax Definitions
name The route map name.
sequence_number The route map sequence number. The valid range is 1–255.
ip_address The 32-bit IP address of the matching mask or “none”.
Defaults
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command allows a matching mask primitive to be placed directly in the route map. By default, no
mask primitive is specified. The default behavior can be reset by changing the value to “
none ”.
•
The example on the next line shows usage combined with the ip bgp policy route-map match-prefix
command.
Examples
-> ip bgp policy route-map routemap1 1 match-mask 255.255.0.0
-> ip bgp policy route-map routemap1 1 match-prefix 17.0.0.0 match-mask 255.255.0.0
Release History
Release 7.1.1; command was introduced.
Related Commands
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapMatchMask
parameter default
ip_address 0.0.0.0
ip bgp policy prefix6-list Creates or deletes a policy route map.
ip bgp policy route-map match-
prefix Configures a matching prefix primitive in the route map.